pureresin Ultra Soft W Anthrazitgrau RAL 7016 1kg
General
Pureresin Ultra Soft W is a water washable, flexible resin. Pureresin Soft W is suitable for use with DLP or LCD/LED 3D printers. The use of high-quality raw materials creates a high-performance resin that can be processed with very short curing times.
Characteristics
Very short curing times
High level of detail
Sharp contours
Smooth object surfaces
Washable with water
Flexible
Packaging
Pureresin Ultra Soft W is supplied in a light-protected HDPE bottle with 0.5kg or 1kg content.
storage
The resin should be stored in a dark, cool and dry place. Avoid direct sunlight and temperatures above 30°C to ensure the longest possible shelf life.
security
Read the safety data sheet carefully and follow the safety instructions. Only use the resin in a well-ventilated place. Wear nitrile gloves and safety goggles when working with resin.
processing
It is essential to shake the resin before each processing in order to achieve homogeneous mixing. During storage, the color particles may settle to the bottom of the bottle.
exposure times:
Base Layers: 15-40s
Remaining shifts: 1.5-15s
Pureresin Ultra Soft W can be cleaned with water after printing. The uncured resin dissolves in the water. Never leave the printed part in the water bath for more than 15 minutes to avoid damaging the printed part. Contaminated water must be disposed of in accordance with local regulations for chemical disposal and should not be discharged into drains.
colour
The RAL color number and designation are intended as a guide only and are not intended to represent an exact specification. The effective colors are always in the similar color range as the RAL color mentioned. Full compliance with the RAL color mentioned is not guaranteed.
Viscosity 25°C
1200 Pa*s
Density 20°C
1.132g/cm3
Yield stress (DIN EN ISO 527)
-MPa
Elongation at yield (DIN EN ISO 527)
-%
Breaking stress (DIN EN ISO 527)
1.34MPa
Elongation at break (DIN EN ISO 527)
1.7%
Shore A
76
Shore D
-