purefil GreenTEC verkehrsrot 1kg 1.75mm
The use of high-quality raw materials creates a 3D printer filament that is particularly easy to process. Using a state-of-the-art manufacturing process, very low manufacturing tolerances are achieved, which leads to convincing printing results with all FDM 3D printers. Each coil is sealed in a high-quality bag.
- Made in Switzerland
- small diameter and roundness tolerances
- easy to print
GreenTEC is a bioplastic with high tensile and flexural strength.
GreenTEC is an ecological alternative to other technical plastics, consisting of 100% renewable raw materials and biodegradable according to DIN EN ISO 14855.
GreenTEC filament is particularly easy to process on all standard 3D printers. Similar temperatures to PLA are required for processing.
The heat resistance is relatively high at 115°C (VST).
This filament meets the compositional requirements of European Regulation No. 10/2011 on plastic materials intended for food contact.
- made from 100% renewable raw materials
- Odor free - Low shrinkage
- Good tensile and flexural strength
- Higher temperature resistance than PLA
Diameter: 1.75 +/- 0.05mm
Nozzle temperature: 180-230 ° C
Printing table temperature: 50-90 ° C
technical datasheet EN https://s3-eu-central-1.amazonaws.com/plentymarkets-public-92/pvdtyofq45f2/propertyItems/
technical datasheet FR https://s3-eu-central-1.amazonaws.com/plentymarkets-public-92/pvdtyofq45f2/propertyItems/
technical datasheet IT https://s3-eu-central-1.amazonaws.com/plentymarkets-public-92/pvdtyofq45f2/propertyItems/