purefil PVA transparent 1kg 1.75mm
The use of high-quality raw materials creates a 3D printer filament that is particularly easy to process. Using a state-of-the-art manufacturing process, very low manufacturing tolerances are achieved, which leads to convincing printing results with all FDM 3D printers. Each coil is sealed in a high-quality bag.
- Made in Switzerland
- small diameter and roundness tolerances
- easy to print
PVA is a polyvinyl alcohol that can be easily dissolved in cold water. Dissolved in water, it is biodegradable and can therefore be disposed of in normal wastewater. It combines well with other plastics such as PLA, ABS or PETG and is therefore ideal as a support material in dual extrusion printing. Support structures detach from the printed object within 24 hours without leaving any residue.
PVA is very sensitive to moisture and should always be stored in closed bags. If bubbles appear during processing, the filament must be pre-dried.
- Dissolves excellently in cold water
- Biodegradable when dissolved in water
- Good adhesion to PLA, ABS and PETG
Diameter: 1.75 +/- 0.05mm
Nozzle temperature: 190-220 ° C
Printing table temperature: 60-90 ° C
technical datasheet DE 223/Materialdatenblatt PVA purefil.pdf