Creality 3D-Drucker Sermoon M1
The Sermoon M1 is one of the most powerful printers Creality has created. It´s a industrial grade, high temperature printer with a lot of useful functions.x
Highlights
- Double casing for best thermal insulation
- Water and air-cooled nozzles
- Dual temperature control system, real time monitoring of temperature
- Uniform results thanks to hot-air circulation
- High power heat bed that reaches 150° in just 3 minutes
- Power off delay
- Constant temperature in filament chamber
- Case cooling system
- Large display with intuitive GUI
Double casing for best thermal insulation
The whole printer has a double-layer casing which is very good for the thermal insulation effect.
High power heat bed
The heat bed is made from 6 mm aluminum. It can reach 150°C in just 3 minutes. The build platform is made crystal silicon glass with a nano-coating.
Water cooling
The cooling system works with both air and water. This provides the optimal cooling effect and makes sure that the temperature around the nozzle keeps at a steady temperature.
Temperature system
In the compartment for the filament the relative air humidity can be kept at 10-25% - this will ensure that the filament won’t be subjected to the damp air, which can result in failed prints and brittle filament.
Dual heating systems
The printer has a heated build chamber that can be set to 90°C. Thanks to infrared radiation and hot air circulation the heated chamber reaches temperature quick and provides the chamber with a “soft” heat that reaches every corner.
Power off delay
If there should be a power outage during printing the nozzle will automatically return to the X-axis zero before turning off the machine.
Case cooling
When printing with high-temperature materials, the top door cooling system can be activated. This system cools down the air between the two shells. This improves stability and service life of the equipment.
| Usable Filament Diameter | 1.75 mm |
| Max Nozzle Temperature | 270 ºC |
| Open Filament System | Yes |
| Extruder Type | Bowden |
| Recommended Printing Speed Max | 100 mm/s ( |
| Build Area | 400 mm x 450 mm x 500 mm |
| Build Plate Temp Max | 150 ºC |
| Build Plate Material | Carbon crystal silicon glass plate |
| Build Plate Attachment | clamp |
| Build Chamber During Process | Open or Closed |
| Build Chamber Heated | Yes, max 90°C |
| Filament Chamber Closed | Yes |
| Extruder Number Of | 1 |
| Installation Space / Requirements | |
| Total Mass Overall Dimensions | 1000 mm x 985 mm x 1335 mm |
| Total Weight | 300 kg |
| Max Power Consumption | 3500 W |
| Voltage | AC: 100 V / 240 V |
| DC: 24 V | |
| Equipment | |
| Emergency Shutdown | Yes |
| Hepa Filter | Yes |
| Filament Runout Sensor | Yes |
| Power Loss Fail Safe | Yes |
| Touch Screen | Yes |
| Connection | |
| SD Card | Yes |
| USB Port | Yes |
| Accuracy | |
| Layer Height | 0.1 - 0.4 mm |
| Resolution | 0.1 mm |
| Shipping | |
| Shipping Box | 1300 mm x 1300 mm x 1500 mm |
| Shipping Weight | 330 kg |