Item details
The use of high-quality raw materials creates a 3D printer filament that is particularly easy to process. Using a state-of-the-art manufacturing process, very low manufacturing tolerances are achieved, which leads to convincing printing results with all FDM 3D printers. Each coil is sealed in a high-quality bag.
- Made in Switzerland
- small diameter and roundness tolerances
- easy to print
POM is a semi-crystalline thermoplastic. It is one of the typical technical thermoplastics with good mechanical properties and high dimensional stability as well as excellent sliding and wear behavior. POM filament is therefore one of the preferred construction materials, e.g. B. for snap connections and gears.
The application limits are from about -40 to 100 °C permanent temperature, short-term up to 120 °C. The thermal expansion of POM is in the middle range. POM has good electrical insulating properties.
Due to its high crystallinity, POM filament has good resistance to numerous chemicals. They are resistant to diluted acids (pH > 4) and diluted alkalis, aliphatic, aromatic and halogenated hydrocarbons, oils and alcohols. They are not resistant to concentrated acids and hydrofluoric acid as well as oxidizing agents. POM has low moisture absorption and high gas density. Weather resistance is not good.
Characteristics:
- Excellent sliding and abrasion resistance
- low coefficient of friction
- High resilience (therefore optimal for snap connections)
- Good electrical insulating properties
- Good resistance to many chemicals
- low moisture absorption
- High gas density
- Poor weather resistance
- High toughness down to -40°C
Technical data
Material: ABS
Diameter: 1.75 +/- 0.05mm
Weight: 1kg
Nozzle temperature: 210-260 ° C
Printing table temperature: 80-110 ° C
Customer reviews
Average rating
0
Based on 0 review(s)
5
( 0 )
4
( 0 )
3
( 0 )
2
( 0 )
1
( 0 )
Nobody has submitted a review for this item yet
EU Responsible Person - click for details