Item details
Most plastics absorb moisture from the ambient air. This moisture affects the proper processing of the filaments. With the SUNLU S2 filament dryer, you can remove the moisture from the plastic again. It can be printed straight out of the box. This means that the filament does not get wet during processing.
The SUNLU S2 filament dryer has an extraordinary design: heating module, 360° constant temperature, fast drying and a large screen for easy operation.
The device has a timer function to set the drying time. The temperature can be set between 35-70°C. Thanks to the integrated moisture measurement, the filament is optimally pre-dried for 3D printing.
Technical data
Product size: 265(L) X274(W) X 118(H) mm
Maximum capacity: φ210*85（H）mm
Net weight: 1190g (Including power adapter)
Working environment:
A) Environment temperature: 20℃~35℃
B) Relative humidity: ≤90%
Temperature setting range: 35℃~70℃
Power adapter specification:
A) Input specification: AC 100V~240V，50/60Hz
B) Output specification: DC:24V±1.2, 2A
Standby Power: 0.05W
Maximum working current: 1.9A
Maximum working power: 48W
LCD display screen: 6.4-inch LCD display
Suitable for filament diameters: 1.75mm/2.85mm
Customer reviews
Average rating
0
Based on 0 review(s)
5
( 0 )
4
( 0 )
3
( 0 )
2
( 0 )
1
( 0 )
Nobody has submitted a review for this item yet
Legal information - click for details