Magigoo Adhesion Promoter Pro PP 50ml

Reliable Adhesion for Polyolefin Filaments

PP and PE are notoriously difficult to print due to their low surface energy and tendency to warp. Magigoo Pro PP forms a temporary strong bond on hot build plates that holds prints firmly through bed heating and chamber cooling cycles, ensuring the first layer adheres without lifting.

Effortless Pop-Off at Room Temperature

Once your build plate cools to room temperature, the adhesive loses its grip—allowing prints to release cleanly with just a gentle tap. This tool-free removal protects both the model and the build surface from damage.

Clean, User-Friendly, and Eco-Conscious

This formula is water-based, odorless, and non-toxic, making it safe for home and professional environments. It’s easy to clean off—just a damp cloth or warm water does the job. The pen-style applicator gives you precise control with no overspray or mess.

Ideal for Technical and Industrial Printing

Magigoo Pro PP has been optimized for tough-to-print materials like PP and PE blends, frequently used in engineering, packaging, and industrial applications. It ensures higher first-layer success rates, especially with larger or mechanically stressed prints.

Simple Application Routine

1. Shake the pen well before use.

2. Apply a thin, even layer to a cold, clean build plate.

3. Heat the bed per filament specs, begin your print, and let cool after completion—the part will pop off automatically.

4. Clean the bed surface after each use with a damp cloth or warm water, no solvents required.