Bambu Lab dual-sided textured PEI plate

• Before auto-leveling, it is necessary to repeatedly rub the nozzle in the special wiping area of the build plate to completely remove any residual material at the tip of the nozzle. The coating in the special-designed wiping area will gradually become worn over time. This is normal and does not affect print quality or nozzle lifetime, so there is no need to worry about any quality issues.

Surface Finish

The Bambu Dual-sided Textured PEI Plate uses sprayed PEI to provide a tactile matte surface to areas of the model that touch the build plate

• When printing filament with a heat deflection temperature below 60℃ (such as PLA, PVA, TPU) the hotbed temperature is set above 45℃ and it is recommended to open the front glass door and remove the upper glass cover plate to avoid heat creep that can cause the material to soften, leading to abnormal extrusion or clogs
   
• The Automatic Calibration for Flow Rate is not recommended, as the LIDAR will have trouble correctly reading the print surface and the calibration can be affected
   
• Regularly clean the print surface with dish soap and hot water to eliminate any dust or grease residue, which might cause bad adhesion
   
• Do not clean the Textured PEI with Acetone, as it might damage the PEI surface
   
• Always wait for a few minutes before removing printed models to allow them to cool down for easy print removal

Surface temperature resistance Up to 180℃
Usable print size 256*256 mm
Flexible spring steel, thickness 0.5 mm
Textured PEI coating, thickness 0.075 mm
Package weight 450 g
Pack size 290*290*4 mm